Alloy factory electrode paste quality


Since the second half of 2016, black carbon products have entered the rising channel. So far, petroleum coke after forging has risen by 100%, residual anode has risen by 200%, pitch has risen by 200%, and coal tar has risen by 150. Other carbon The finished products, such as graphite electrodes, have risen by 1500% so far.

Analyze the reasons for the increase in the price of carbon products, mainly because of the state’s control of pollution problems. In the past, due to the extensive method, some carbon companies had the problem of small chaos, sewage discharge did not meet the standard, and the quality of the finished product was low. After the environmental protection department has taken care of these enterprises, although the pollution problem has been greatly reduced, the reduction of most of the production capacity has caused the price of products to soar. Moreover, the issue of environmental protection is not a problem of one family or two families, but a systemic problem as a whole. The price increase is not only for carbon raw materials, but also for finished metal products and metal products. If things go on like this, it will inevitably affect the global influence of Chinese manufacturing.

I personally believe that the government will not be loose on environmental issues in the future, and it is difficult for the prices of raw materials to adjust in the short term. Companies with complete environmental protection equipment will survive and grow rapidly. Dirty, messy companies will find it difficult to survive the environmental storm.

Rongxin carbon environmental protection equipment complete, the annual output of two hundred thousand tons electrode paste after two hundred and fifty thousand tons of calcined coke.

Rongxin Carbon Electrode Paste has a complete range of models, which can meet the use of various types of submerged arc furnaces.

Various models of Rongxin Carbon Electrode Paste are complete

Si
<0.28%
Fe
<0.25
P
0.004%
 
Ash Ash Content )
2-10 %
Resistance Resistivity )
55-90  m
Volatile VM )
10.0-15. 0
Density Density )
>1.46g/cm3
Compressive strength
(Compression Strength)
>18Mpa
Malleability
(Extensibility)
6-20
Apparent density
(Apparent Density)
>1.42g/cm3
Flexural strength
(Rupture Density)
>4.0
True density
(Real Density)
>1.98g/cm3
Liquidity Coefficient
1.80-2.10

Tell Us What You're Looking For.

Please Leave your message you want to know! We will respond to your inquiry within 24 hours!