Analysis of Electrode Accidents in Submerged Arc Furnace One


Electrode accidents are common accidents in ferroalloys and calcium carbide enterprises smelted by submerged arc furnaces. The cause of electrode accidents is accurately analyzed and judged, and targeted preventive measures can be taken to reduce the occurrence of electrode accidents. However, due to the analysis of electrode accidents, it is supplied by electrode paste. The manufacturer and the electrode paste use the interference of multiple factors. To accurately determine the cause of the electrode accident requires objective evidence recognized by both parties, and the electrode section is a good objective evidence, so the analysis of the electrode section is of great significance. .

1. Electrode paste segregation, resulting in delamination of aggregates and powders. 1. Section state: There is obvious particle layer segregation on the section of the electrode. According to the size and cross-section of the radiant heat source for electrode baking, there are two situations, one is the accumulation of particles along the outer ring of the electrode, and the other is the accumulation of particles in the middle of the electrode.

2. Other phenomena: the flow coefficient of the electrode paste is greater than 2.0, and the elongation rate is greater than 40.

3. Analysis of the reason: the popularity of the electrode paste is too good, resulting in particle segregation, and the local strength of the electrode with more aggregates is low, and it is easy to be broken by external force. , A large part of the powder material is easily broken by the internal stress of the electrode itself. The two different accumulations of aggregate are caused by different sintering methods

Analysis of Electrode Accidents in Submerged Arc Furnace One

 

Tell Us What You're Looking For.

Please Leave your message you want to know! We will respond to your inquiry within 24 hours!