Electrode paste can be said to be a product with simple process and complex technology in carbon production. One is because the electrode paste is kneaded and formed into a finished product. Unlike other carbon and graphite products, when defects occur in the previous process, it can be compensated by baking, graphitization or even impregnation. Secondly, the electrode paste is directly to the user, and the electrode is formed after the user’s use process is completed to play the function of the carbon product. However, the electrode paste users are very different: different furnace types; different production products; different regions; different environments; different seasons and operators The technical level of the electrode paste is also different. The so-called: it is difficult to adjust. It is difficult for the electrode paste manufacturer to adapt to such complicated use conditions. Therefore, the production process of the electrode paste seems to be relatively simple. To produce a good one, it needs special Experience and technology.
Electrode paste is also called self-baking electrode. It relies on the heat in the submerged arc furnace to complete the roasting. Therefore, matching the consumption speed of the electrode with the roasting speed is the key to the use of electrode paste. Due to the development of submerged arc furnace technology, The direction of large-scale and airtight development. During the firing process of the electrode, the more conductive heat and the reduction of radiant heat obtained by the open furnace type in the past are only conductive heat. Therefore, the heat obtained by the electrode from the furnace is greatly reduced. It is required to improve the sintering performance of the electrode paste to make up for this deficiency.
Please Leave your message you want to know! We will respond to your inquiry within 24 hours!